| |
Aerial
O.F. Cable (ADSS)
|
|
| |
|
|
| |
FEATURES
• All dielectric construction.
• Protection from lightning damage and electrical
interference.
• 2 36 Single Mode Fiber per cable.
• Self supporting type.
• Designed for NESC loading conditions.
• Moderate span length up to 200 Mtrs.
APPLICATIONS
• Can be used near high voltage lines.
• Energy distribution networks. ~_1 '1 1 1
|
|
| |
|
|
| |
MECHANICAL & ENVIRONMENTAL SPECIFICATIONS
• Maximum tensile strength: Depends on loading
conditions & Span.
Minimum bend radius
• No load: 10 x Cable dia.
• Full load (Installation): 20 x Cable dia.
• Maximum crush resistance: 200 Newton /cm
• Temperature rang (operational): 20oC to + 70oC
DESCRIPTION
No metallic component has been used in cable design.
The cable design ensures that the optical fiber in the
cable do not
experience any strain under the designed loading conditions.
The CSM and aramid yarn provides the tensile strength
to the cable.
A customised cable solution can be offered based on
typical Spans between the tower, Permissible sag , Loading
conditions (wind / ice)
provided by the customer.
Note: X=1 for SM fiber, X=3 for SM Dispersion
shifted fiber, X=4 for SM NZ DS fiber, X=5 for MM (62.5/125),
X=6 for MM (501125).
002 036 for fiber count. When ordering the cable, span
& loading conditions to be mentioned.
The cable will be tested as per IEC 60794 1.
Customer design & specifications can also be incorporated. |
|
|
