| |
Aerial
O.F. Cable (FIG Of "8" Type)
|
|
| |
IMG NOT AVAILABLE
|
|
| |
FEATURES
* Self supporting type.
* Designed for typical spans up to 250 Mtrs.
* 2 48 Single Mode Fiber per cable.
* Integral messenger saves installation time and cost.
* Standard clamps / grips can be used .
* Designed for NESC loading conditions.
APPLICATIONS
* Rural telecommunication networks.
* Telemetry & SCADA Networks.
|
|
| |
IMG NOT AVAILABLE
|
|
| |
MECHANICAL & ENVIRONMENTAL SPECIFICATIONS
Maximum tensile strength: Depends on loading conditions
& Span.
Minimum bend radius
No load : 10 x Cable dia.
Full load (Installation) : 20 x Cable dia
Maximum crush resistance: 200 Newton /cm.
Temperature rang (operational): 20'C to + 70'C
DESCRIPTION
The cable design ensures that the optical fiber in the
cable do not experience any strain under designed loading
conditions.
The messenger provides the tensile strength to the cable.
A customised cable solution can be offered based on
typical spans between the tower,
Permissible sag, Loading conditions (Wind/ice) provided
by the customer. Completely Non Metallic fig of "8"
cable constructions are also available.
Note : X=1 for SM fiber , X=3 for SM Dispersion
shifted fiber , X=4 for SM NZ DS fiber X=5 for MM (623/125),
X=6 for MM (50/125).
* 002 048 for fiber count. When ordering the cable,
span & loading conditions to be mentioned. The cable
will be tested as per IEC 60794 1.
Customer design & specifications can also be incorporated. |
|
|
